Start with what the tag actually is
The Flower Enamel Pet ID Tag pairs a detailed flower enamel finish with a durable metal backing and includes custom engraving on the reverse at no extra cost. It ships with a strong split ring, so the tag hangs from the collar rather than sitting flush against it. That construction matters for care: the enamel face is the part you are protecting, while the metal backing and split ring take the rubbing against the collar and other tags.
The catalog also states a 5-year guarantee against breakage or fading. That is a useful backstop, but it does not mean the tag is indestructible. A sensible care routine still reduces the everyday wear that dulls enamel and softens engraving.
What the catalog confirms
- Flower Enamel Pet ID Tag: High-quality enamel finish with a detailed flower design and a durable metal backing. The enamel is the decorative surface you are cleaning; the metal backing is the structural layer, so treat them differently.

Flower Enamel Pet ID Tag - Flower Enamel Pet ID Tag: Includes custom engraving on the reverse and a strong split ring for attachment. The engraving sits on the back, away from the flower face, but it still needs protection from abrasion.
- Flower Enamel Pet ID Tag: 5-year guarantee against breakage or fading. Gives you a defined recourse if the finish fails, but does not replace routine cleaning.
A simple cleaning routine for the enamel face
The supplied record does not include step-by-step cleaning instructions, so the following is general enamel-care practice rather than a manufacturer procedure. Keep it gentle and stop if the finish looks stressed.
- Remove the tag from the collar: Unclip the split ring so you can clean the tag flat and avoid soaking the collar hardware.
- Wipe with a soft damp cloth: Use plain water and a soft cloth on the enamel face. Avoid abrasive pads, scouring cream or anything that can scratch the glossy surface.
- Dry immediately: Pat the tag dry with a soft cloth rather than leaving it wet. Drying prevents water sitting around the enamel edge and the split ring.
- Clean the engraving side separately: Wipe the reverse gently with the same damp cloth. Do not scrub the engraved letters, because abrasive cleaning can wear the recessed detail that keeps the text readable.
- Reattach and check the ring: Before clipping the tag back on, look at the split ring for distortion and make sure it is fully closed.
What to avoid if you want the colours to last
- Harsh chemicals and solvents: The catalog does not list chemical resistance, so do not assume the enamel will tolerate polish, bleach or adhesive removers. Stick to water and a soft cloth.
- Abrasive cleaners: Scratching the enamel surface is the most direct way to dull the flower design. Avoid scouring powders and stiff brushes.
- Tag clatter: The Flower tag hangs from a split ring, so it can knock against other metal tags. If your pet wears several tags, the enamel face will see more impact wear.
- Chewing and rough play: Enamel over metal is not a chew toy. If your dog or cat habitually mouths tags, the enamel edge is the most vulnerable point.
What to do if you notice a chip or dulling
The catalog does not describe a repair or refinishing process for enamel chips, so do not try to touch up the flower design with paint or nail polish; that is not a supported fix and can make the finish look worse. If the enamel chips or the colour fades, the 5-year guarantee against breakage or fading is the relevant route. Keep a note of when you noticed the change and how the tag is worn, because that helps a guarantee claim.
Minor surface dulling from everyday contact is different from a chip. A gentle wipe with a damp cloth is the only cleaning step the supplied information supports; if dulling persists after that, treat it as a wear question rather than a cleaning problem.
Size and fit affect how much wear the tag sees
The Flower tag comes in three sizes: Small at 22x27mm, recommended for all cats and dogs up to 10kg; Medium at 25x30mm, recommended for dogs 10-25kg; and Large at 30x35mm, recommended for dogs over 25kg. Choosing the size that matches your pet’s weight range keeps the tag proportionate on the collar and reduces the chance of it catching on furniture or bedding.
A tag that is too large for a small collar hangs lower and swings more, which means more contact with the environment. A tag that is too small for a large dog can be harder to read and may sit awkwardly against the collar hardware. Matching the size to the weight band is the simplest way to limit unnecessary wear.
Size options and what they mean for daily wear
- Flower Enamel Pet ID Tag: Small: 22x27mm, recommended for all cats and dogs up to 10kg. The smallest version sits best on a light collar and reduces swing on small pets.
- Flower Enamel Pet ID Tag: Medium: 25x30mm, recommended for dogs 10-25kg. A middle size that balances readability with a moderate hanging profile.
- Flower Enamel Pet ID Tag: Large: 30x35mm, recommended for dogs over 25kg. The largest face gives the most engraving room but also the most surface to clean and inspect.
A quick monthly check that takes a minute
Once a month, take the tag off and look at three things: the enamel face for chips or dull patches, the engraved reverse for readability, and the split ring for distortion. Clean the tag with a damp cloth while it is off, dry it, and reattach it. This short check is the practical way to catch wear before it becomes a guarantee claim, and it keeps the flower design looking as intended for as long as possible.


