Start with the two decisions that matter
The Black Large Bow Tie Pet ID Tag is a solid metal tag with a glossy black enamel bow tie face, engraved on the reverse with your pet's name and contact details. Before you order, you are really making two decisions: whether the Large size suits your dog and collar, and exactly what text should appear on the back.
The catalog lists one size, Large, measured at 40x25mm. It is described as ideal for medium to large dogs, with a lightweight feel and a strong split ring for collar attachment. That gives you a clear starting point, but it does not tell you how the tag will sit on your particular collar, so the fitting check below is worth doing.
What the catalog confirms about this tag
- Black Large Bow Tie Pet ID Tag: Large size: 40x25mm This is the only size listed, so use these dimensions to judge whether the tag suits your dog's collar and frame before ordering.

Black Large Bow Tie Pet ID Tag - Black Large Bow Tie Pet ID Tag: Solid metal construction with a glossy black enamel bow tie face The metal body carries the engraving on the reverse, while the enamel face is the decorative side that faces outward.
- Black Large Bow Tie Pet ID Tag: Personalised engraving included on the reverse Your contact details go on the back, so the text you choose is what someone will read if your dog is found.
- Black Large Bow Tie Pet ID Tag: Supplied with a strong split ring for easy collar attachment The split ring is the supplied attachment method, so plan your collar fit around it rather than assuming a clip is included.
How to check the collar fit before you order
The catalog does not give a recommended collar width or a minimum collar thickness, so treat these as practical checks rather than manufacturer instructions.
- Measure your dog's collar width: Compare the collar width with the 40x25mm tag footprint. A tag that is much wider than the collar can hang at an angle, while a narrow collar may let a large tag swing more freely.
- Look at the D-ring or attachment point: The split ring needs to pass through your collar's D-ring or tag loop. Check that the ring opening clears the hardware you plan to use.
- Match the size to your dog: The tag is described as ideal for medium to large dogs. If your dog is small or wears a narrow collar, the Large footprint may look and feel oversized.
- Do a short trial wear: Attach the tag with the split ring and let your dog wear it briefly while you watch. Check that the tag hangs without catching and that your dog is comfortable moving around.
Engraving the reverse: plan the text first
The engraving sits on the reverse of the tag, so the bow tie face stays clean while your contact details remain readable. The catalog does not state a character limit or a maximum number of lines, so keep the text short and prioritise the details someone would need first.
A practical order is your pet's name, then one phone number, then a second contact or a short address line if space allows. Avoid cramming every detail onto the tag; a clear phone number is more useful than a crowded block of text. If you want a specific layout, confirm it with the store before ordering, since the supplied information does not describe the engraving format.
Engraving choices that keep the back readable
- Put the pet's name first: A name helps whoever finds your dog address the animal correctly and reassures them that the dog is owned.
- Use one primary phone number: Choose the number most likely to be answered when your dog is found, and keep it in a consistent format.
- Add a second contact only if space allows: A second number or a short address can help, but only if it does not make the primary number harder to read.
- Check spelling and digits before dispatch: The catalog confirms engraving is included, but it does not describe a correction process, so review your order text carefully.
Attaching the split ring to the collar
The tag comes with a strong split ring, which is the supplied attachment method. Thread the ring through your collar's D-ring or tag loop, then rotate the tag so the engraved reverse sits against the collar and the enamel bow tie faces outward. This keeps the readable side accessible while protecting the decorative face from knocks.
The catalog does not include cleaning or care instructions for this tag, so avoid inventing a routine. If the enamel face becomes dirty, a soft damp cloth is a reasonable general approach, but check with the store if you are unsure about a particular cleaning product. The catalog does state a 5-year guarantee against breakage or fading, which is worth noting when you assess long-term wear.
Where this tag fits best
- Black Large Bow Tie Pet ID Tag: Described as ideal for medium to large dogs This is the clearest size guidance in the catalog, so use it as your main filter before ordering the Large tag.
- Black Large Bow Tie Pet ID Tag: Lightweight feel despite solid metal construction A lighter feel can matter for everyday collar wear, though the catalog does not give a weight figure.
- Black Large Bow Tie Pet ID Tag: 5-year guarantee against breakage or fading This is the stated durability support, but it does not replace the fitting check or the engraving review.
What the supplied information does not settle
The catalog does not confirm a recommended collar width, a maximum engraving length, or specific cleaning instructions. It also does not state a weight for the tag. These gaps are decision limits, not faults: they mean you should confirm the details that matter most to you with Pet-Tags.com before ordering, especially if your dog is between sizes or you need a particular engraving layout.
For a medium to large dog with a standard collar, the Black Large Bow Tie Pet ID Tag offers a clear combination of a decorative enamel face and practical reverse engraving. Check the 40x25mm footprint against your collar, keep the engraving concise, and use the supplied split ring as intended. That is enough to make a confident choice without guessing at details the catalog does not provide.


